Difference between revisions of "Third-party software integration: Apache"

From OpenKM Documentation
Jump to: navigation, search
Line 201: Line 201:
 
         </Proxy>
 
         </Proxy>
 
         ProxyVia On
 
         ProxyVia On
</IfModule>
+
</IfModule>
  
  
 
Now create the configuration file /etc/apache2/sites/openkm.conf with this content:  
 
Now create the configuration file /etc/apache2/sites/openkm.conf with this content:  
  
<VirtualHost *:80>
+
<VirtualHost *:80>
 
     ServerName openkm.your-domain.com
 
     ServerName openkm.your-domain.com
 
     RedirectMatch ^/$ /OpenKM
 
     RedirectMatch ^/$ /OpenKM
Line 215: Line 215:
 
     ErrorLog /var/log/apache2/your-domain.com-error.log
 
     ErrorLog /var/log/apache2/your-domain.com-error.log
 
     CustomLog /var/log/apache2/your-domain.com-access.log combined
 
     CustomLog /var/log/apache2/your-domain.com-access.log combined
</VirtualHost>
+
</VirtualHost>
  
 
Finally restart apache
 
Finally restart apache

Revision as of 12:14, 20 July 2011

Expose OpenKM directly from JBoss can be dangerous if you need the application to be accessed from Internet. Also this 8080 may be closed by a firewall. For these reasons, is a good idea expose your OpenKM installation through the standard web port 80. In the following steps we explain how to configure Apache to handle these request and forward to JBoss application server using the AJP13 protocol.

From the Apache documentation: The AJP13 protocol is packet-oriented. A binary format was presumably chosen over the more readable plain text for reasons of performance. The web server communicates with the servlet container over TCP connections. To cut down on the expensive process of socket creation, the web server will attempt to maintain persistent TCP connections to the servlet container, and to reuse a connection for multiple request/response cycles.

Debian / Ubuntu

The first thing in to install the required Apache software. From Debian / Ubuntu you can install Apache with a single command:

$ sudo aptitude install apache2

Edit the file called /etc/apache2/apache2.conf and configure a ServerName to prevent warnings in the Apache startup process:

ServerRoot "/etc/apache2"
ServerName "your-domain.com"

Enable the proxy module, needed to forward petitions to JBoss:

$ sudo a2enmod proxy_ajp

Now create the configuration file /etc/apache2/sites-available/openkm.conf with this content:

<VirtualHost *>
    ServerName openkm.your-domain.com
    RedirectMatch ^/$ /OpenKM
    <Location /OpenKM>
        ProxyPass ajp://127.0.0.1:8009/OpenKM
        ProxyPassReverse http://openkm.your-domain.com/OpenKM
    </Location>
    ErrorLog /var/log/apache2/your-domain.com-error.log
    CustomLog /var/log/apache2/your-domain.com-access.log combined
</VirtualHost>

The VirtualHost ServerName must be other than ServerName in the main Apache configuration. Enable this site configuration:

$ sudo a2ensite openkm.conf

Nota advertencia.png If after restart Apache you see a warning like:
[warn] NameVirtualHost *:80 has no VirtualHosts
you have to change the virtual host definition from <VirtualHost *> to <VirtualHost *:80>

If you don't want to show the /OpenKM context, try this as your VirtualHost configuration:

<VirtualHost *>
  ServerName openkm.your-domain.com
  ProxyPass / ajp://localhost:8009/OpenKM/
  ProxyPassReverse / http://openkm.your-domain.com/OpenKM/
  ErrorLog /var/log/apache2/your-domain.com-error.log
  CustomLog /var/log/apache2/your-domain.com-access.log combined

  RewriteEngine on
  RewriteCond %{REQUEST_URI} /OpenKM*
  RewriteRule ^(/.*)$ http://localhost:8080$1 [P]

  RequestHeader edit X-GWT-Module-Base ^(http://openkm.your-domain)/frontend/(.*)$ $1/OpenKM/frontend/$2
</VirtualHost>

You need also set the configuration parameter system.apache.request.header.fix to on (true). Note than in OpenKM 5.1 the configuration is stored in database and the OpenKM.cfg configuration only make sense in the database (Hibernate) configuration parameters.


Nota clasica.png If you see an error like:
Invalid command 'RewriteEngine', perhaps misspelled or defined by a module not included in the server configuration

you need to enable this Apache module:

$ sudo a2enmod rewrite
$ sudo a2enmod proxy_http
$ sudo a2enmod headers

You have to enable explicitly the proxy access editing the Apache configuration file /etc/apache2/mods-available/proxy.conf:

<IfModule mod_proxy.c>
  #turning ProxyRequests on and allowing proxying from all may allow
  #spammers to use your proxy to send email.

  ProxyRequests Off

  <Proxy *>
    AddDefaultCharset off
    Order deny,allow
    Allow from all
    Deny from all
    #Allow from .example.com
  </Proxy>

  # Enable/disable the handling of HTTP/1.1 "Via:" headers.
  # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
  # Set to one of: Off | On | Full | Block

  ProxyVia On
</IfModule>

Finally restart Apache:

$ sudo /etc/init.d/apache2 restart

Now you can access your OpenKM installation from http://openkm.your-domain.com/. Another advantage of using Apache is that you can log OpenKM access and generate web statistics.

SSL in Debian / Ubuntu

$ sudo mkdir /etc/apache2/ssl
$ sudo /usr/sbin/make-ssl-cert /usr/share/ssl-cert/ssleay.cnf /etc/apache2/ssl/apache.pem
$ sudo a2enmod ssl

Ensure ports 443 is listen in /etc/apache2/ports.conf

Do the same task related to port 80 but changing the configuration file /etc/apache2/sites-available/openkm.conf with this content:

<VirtualHost *:443>
    ServerName openkm.your-domain.com
    RedirectMatch ^/$ /OpenKM
    <Location /OpenKM>
        ProxyPass ajp://127.0.0.1:8009/OpenKM
        ProxyPassReverse http://openkm.your-domain.com/OpenKM
    </Location>
    ErrorLog /var/log/apache2/openkm.your-domain.com-error.log
    CustomLog /var/log/apache2/openkm.your-domain.com-access.log combined

    SSLEngine on
    SSLCertificateFile /etc/apache2/ssl/apache.pem
</VirtualHost>

Red Hat / CentOS

Here you can use the yum application manager to install Apache:

$ sudo yum install httpd

Now edit the file /etc/httpd/conf.d/proxy_ajp.conf and add:

ProxyPass /OpenKM ajp://localhost:8009/OpenKM

After that, restart Apache to make effective this configuration.

$ sudo /etc/init.d/httpd restart

SSL in Red Hat / CentOS

$ sudo yum install mod_ssl openssl crypto-utils

Generate private keys ( for more information visit Apache HTTP Secure Server Configuration)

$ genkey your-domain.com

Nota clasica.png Normally you want to generate self-certificate and not sending to Certify Authority. Is good practice put some password on private key, but in this case each time you restart apache service it'll be demanded.

During the process will be generated two files at

SSLCertificateFile /etc/pki/tls/certs/your-domain.com.cert 
SSLCertificateKeyFile /etc/pki/tls/private/your-domain.com.key

Must modify the /etc/httpd/conf.d/openkm.conf file

<VirtualHost *:443>
  ServerName your-domain.com
  ProxyPass / ajp://localhost:8009/OpenKM/
  ProxyPassReverse / http://your-domain.com/OpenKM/
  ErrorLog /var/log/your-domain.com-error.log
  CustomLog /var/log/your-domain.com-access.log combined

  RewriteEngine on
  RewriteCond %{REQUEST_URI} /OpenKM*
  RewriteRule ^(/.*)$ http://localhost:8080$1 [P]
  ProxyPassReverse / http://localhost:8080/

  SSLEngine on
  SSLCertificateFile /etc/pki/tls/certs/your-domain.com.cert
  SSLCertificateKeyFile /etc/pki/tls/private/your-domain.com.key
</VirtualHost>

Finally must modify SSLCertificateFile and SSLCertificateKeyFile values in file /etc/httpd/conf.d/ssl.conf

SSLCertificateFile /etc/pki/tls/certs/your-domain.com.cert
SSLCertificateKeyFile /etc/pki/tls/private/your-domain.com.key

Now you can access your OpenKM installation from http://openkm.your-domain.com/. Another advantage of using Apache is that you can log OpenKM access and generate web statistics.

MAC OS

Edit the file called /etc/apache2/apache2.conf and configure a ServerName, enable proxy modules and mod_proxy:

ServerRoot "/usr"
ServerName "your-domain.com"
LoadModule proxy_module libexec/apache2/mod_proxy.so
LoadModule proxy_ajp_module libexec/apache2/mod_proxy_ajp.so
<IfModule mod_proxy.c>
       ProxyRequests Off
       <Proxy "*">
               AddDefaultCharset off
               Allow from all
               Deny from all
               Order Deny,Allow
       </Proxy>
       ProxyVia On
</IfModule>


Now create the configuration file /etc/apache2/sites/openkm.conf with this content:

<VirtualHost *:80>
   ServerName openkm.your-domain.com
   RedirectMatch ^/$ /OpenKM
   <Location /OpenKM>
       ProxyPass ajp://127.0.0.1:8009/OpenKM
       ProxyPassReverse http://openkm.your-domain.com/OpenKM
   </Location>
   ErrorLog /var/log/apache2/your-domain.com-error.log
   CustomLog /var/log/apache2/your-domain.com-access.log combined
</VirtualHost>

Finally restart apache

More info

For more info, visit: