Difference between revisions of "Application configuration"

From OpenKM Documentation
Jump to: navigation, search
(Enable document preview)
(Improve OpenKM performance)
Line 334: Line 334:
 
To disable user quota, go to user profile and ser "Quota limit" to 0 (This field is in bytes). This feature of disabling quota is available from OpenKM 5.1.6.
 
To disable user quota, go to user profile and ser "Quota limit" to 0 (This field is in bytes). This feature of disabling quota is available from OpenKM 5.1.6.
  
'''Since:''' OpenKM 5.0.3  
+
'''Since:''' OpenKM 5.0.3
 +
 
 +
== Change cache home ==
 +
In case you have little space in your JBoss partition, you can configure to store the conversion cache folder in another one. For this, use the '''cache.home''' configuration property. By default is set to $JBOSS_HOME/cache.
 +
 
 +
'''Since:''' OpenKM 5.1.8
 +
 
 
[[Category: Installation Guide]]
 
[[Category: Installation Guide]]

Revision as of 09:40, 6 September 2011

OpenKM configuration file

OpenKM.cfg file is the main OpenKM configuration file. You can find this file in your server in $JBOSS_HOME/OpenKM.cfg.

A full listing of available configuration options can be found when logged into OpenKM as administrator role. See the Settings shortcut on the Administration shortcut located on the toolbar.


Nota clasica.png Each time you make some change in the OpenKM.cfg file JBoss server must be restarted to take effect.


Nota advertencia.png Starting with OpenKM 5.1 these configuration properties will be located at database and will ease its management. To change the configuration properties, go to Administration > Configuration.

Changing uploading max file size

The default limit is 25MB. If you want to increase to 50MB:

file.size=50.

Changing repository.xml configuration filename and path

repository.config=repository.xml

Changing default repository home

By default repository is stored in $JBOSS_HOME/repository folder but you can change it with:

repository.home=repotest

Changing default connection role

By default connection role to OpenKM is called UserRole, you can change to other role name. This change need some changes too in web.xml file into OpenKM.war/WEB-INF

default.user.role=OtherRole
<security-constraint>
    <web-resource-collection>
      <web-resource-name>OpenKM Protected Area</web-resource-name>
      <!-- GWT -->
      <url-pattern>/es.git.openkm.frontend.Main/*</url-pattern>
      <url-pattern>/es.git.openkm.backend.Main/*</url-pattern>
      <!-- JSPs -->
      <url-pattern>/admin/*</url-pattern>
      <url-pattern>/mobi/*</url-pattern>
      <!-- Servlets -->
      <url-pattern>/RepositoryStartupServlet</url-pattern>
      <url-pattern>/Test</url-pattern>
      <url-pattern>/OKM*</url-pattern>
    </web-resource-collection>
    <auth-constraint>
      <role-name>AdminRole</role-name>
      <role-name>OtherRole</role-name>
    </auth-constraint>
    <user-data-constraint>
      <transport-guarantee>NONE</transport-guarantee>
    </user-data-constraint>
  </security-constraint>
  <login-config>
    <auth-method>FORM</auth-method>
    <realm-name>OpenKM</realm-name>
    <form-login-config>
      <form-login-page>/login.jsp</form-login-page>
      <form-error-page>/login.jsp?error=1</form-error-page>
    </form-login-config>
  </login-config>
  <security-role>
    <description>Admin user access</description>
    <role-name>AdminRole</role-name>
  </security-role>
  <security-role>
    <description>General user access</description>
    <role-name>OtherRole</role-name>
  </security-role>

Changing default admin role

By default connection role to OpenKM is called AdminRole, you can change to other role name. This change need some changes too in web.xml file into OpenKM.war/WEB-INF

default.admin.role=OtherAdminRole
<security-constraint>
    <web-resource-collection>
      <web-resource-name>OpenKM Protected Area</web-resource-name>
      <!-- GWT -->
      <url-pattern>/es.git.openkm.frontend.Main/*</url-pattern>
      <url-pattern>/es.git.openkm.backend.Main/*</url-pattern>
      <!-- JSPs -->
      <url-pattern>/admin/*</url-pattern>
      <url-pattern>/mobi/*</url-pattern>
      <!-- Servlets -->
      <url-pattern>/RepositoryStartupServlet</url-pattern>
      <url-pattern>/Test</url-pattern>
      <url-pattern>/OKM*</url-pattern>
    </web-resource-collection>
    <auth-constraint>
      <role-name>OtherAdminRole</role-name>
      <role-name>UserRole</role-name>
    </auth-constraint>
    <user-data-constraint>
      <transport-guarantee>NONE</transport-guarantee>
    </user-data-constraint>
  </security-constraint>
  <login-config>
    <auth-method>FORM</auth-method>
    <realm-name>OpenKM</realm-name>
    <form-login-config>
      <form-login-page>/login.jsp</form-login-page>
      <form-error-page>/login.jsp?error=1</form-error-page>
    </form-login-config>
  </login-config>
  <security-role>
    <description>Admin user access</description>
    <role-name>OtherAdminRole</role-name>
  </security-role>
  <security-role>
    <description>General user access</description>
    <role-name>UserRole</role-name>
  </security-role>

Change max results in UI

This option limits the search results in UI.

max.search.results=25

Since: OpenKM 4.0

Change access URL

By default OpenKM se the access URL to http://localhost:8080/OpenKM/index.jsp, but obviously you don't want to access your OpenKM installation only from localhost. This URL is used in mail notifications and the copy-to-clipboard feature.To change this default URL use this property:

application.url=http://your-server.com/OpenKM/index.jsp

Since: OpenKM 4.0

Change principal adapter

OpenKM can handle user access using the JBoss DatabasePrincipalAdapter login module by default. OpenKM needs an available method for reading users and roles. The class DatabasePrincipalAdapter does this job. For more information take a look at OpenKM authentication and Active Directory

principal.adapter=com.openkm.core.DatabasePrincipalAdapter

Since: OpenKM 4.0

Switch OpenKM to demo mode

In demo mode some options are disabled by default.

system.demo=on

Since: OpenKM 4.0

Enabling OCR

To enable OCR you must put the files system path of OCR engine

system.ocr=/usr/local/bin/tesseract

Starting with OpenKM 5.1 you can select between 3 OCR engines:

  • Tesseract 2.x
  • Tesseract 3.x
  • Cuneiform 0.7.x

See Third-party software integration: OCR for more info.

Setting default lang to OpenKM UI

OpenKM By default guess language depending on user language browser configuration. But you can set a language for all OpenKM users by default:

default.lang=es-ES

Force username to lowercase

You can forge all username be written in lower case. It's useful for example when you integrate with microsoft active directory where username is not case sensitive

system.login.username.lowercase=on

Since: OpenKM 4.0

Enable document preview

Several applications are used by OpenKM to generate the document preview: OpenOffice.org, pdf2swf and convert. Read Enable PDF to SWF conversion, Enable image preview and Enable OpenOffice.org service. Also take a look at Random errors in preview in case of problems.

Enable PDF to SWF conversion

To enable preview UI tab, OpenKM need to convert PDF files to SWF. And must have installed open office as a service too.

system.pdf2swf=/usr/bin/pdf2swf

Nota clasica.png Starting from OpenKM 5.1 this configuration property has changed to system.swftools.pdf2swf.

Note: Read Third-party software integration: SWFTools for a more complete documentation.

Since: OpenKM 4.1

Enable PS to SWF conversion

To enable postscript document preview, OpenKM need to convert PS files to SWF using the ps2pdf utility from Ghostscript:

system.ghostscript.ps2pdf=/usr/bin/ps2pdf

Since: OpenKM 5.1.2

Enable image preview

To enable image preview, you need to install que ImageMagick convert utility and configure:

system.convert=/usr/bin/convert

Nota clasica.png Starting from OpenKM 5.1 this configuration property has changed to system.imagemagick.convert.

Since: OpenKM 4.1

Enable OpenOffice.org integration

OpenOffice.org is used by OpenKM to convert files to PDF and generating the preview.

system.openoffice=on

Starting with OpenKM 5.0 this properties are changed to:

system.openoffice.path=/usr/lib/openoffice
system.openoffice.tasks=5
system.openoffice.port=2222

Where you should specify a OpenOffice.org installation path, the maximum number of conversion task before restart the service and a port where the OpenOffice.org conversion service will be attached. Only the first one property is mandatory.

Note 1: Read Third-party software integration: OpenOffice.org for a more up-to-date documentation.

Note 2: You can enhance OCR results configuring OpenOffice.org a dictionary. See OpenKM 5.1 OCR configuration for more info.

Since: OpenKM 4.0

Configuring e-mail

To configuring e-mail service you must enable subscription and notification properties. View a complete example in Notification and subscription messages.

subscription.message.subject=OpenKM - {0} - {1};
subscription.message.body=Document: <a href=\"{0}\">{1}</a>
notify.message.subject=OpenKM - NOTIFICATION - {0}
notify.message.body=Document: <a href=\"{0}\">{1}</a>

Since: OpenKM 4.1

Configuring password validation

To configuring password validation you have several properties. CompletePasswordValidator is default password validator class that comes by default with OpenKM. By default validator is not enabled. You can also create your own Create password validator Padlock.gif.

You can select which rules validation you want to enable, for example if you only enable validator.password.min.length property, the validator only will validate minimal length.

validator.password=com.openkm.validator.password.CompletePasswordValidator
validator.password.min.length=numeric value greater than 0
validator.password.max.length=numeric value greater than 0
validator.password.min.lowercase=numeric value greater than 0
validator.password.min.uppercase=numeric value greater than 0
validator.password.min.digits=numeric value greater than 0
validator.password.mini.special=numeric value greater than 0
validator.password.error.min.length=Your message error
validator.password.error.max.length=Your message error
validator.password.error.min.lowercase=Your message error
validator.password.error.max.uppercase=Your message error
validator.password.error.min.digits=Your message error
validator.password.error.min.special=Your message error

Since: OpenKM 4.1

Configuring chat service

By default chat and autologin are enabled. In order to enable or disable values can be "on" or "off".

chat.enabled=off
chat.autologin=off

Since: OpenKM 5.0

Configuring schedulers

There're some schedulers that OpenKM uses. Some internally like mail importer and getting repository news and others used by user interface like dashboard refreshing time and keepalive.


Nota clasica.png Values are in minutes.

OpenKM inquires for repository news ( by default each 24 hours )

schedule.repository.info=1440

OpenKM imports mails from imap server ( by default set to 0, that is disabled )

schedule.mail.importer=0

Nota clasica.png In OpenKM 4.1 and before, the default value was 60 and cannot be disabled.

KeepAlive is used by user interface to mantaining browser connected to OpenKM althought users stay sometime without using any operation. For it reason never might be lower that server timeout session ( by default set to 15 minutes ).

schedule.session.keepalive=15

Dashboard data is refreshing by default each 30 minutes.

schedule.dashboard.refresh=30

Since: OpenKM 4.1

Configuring wizard

You can configure a wizard each time any user uploading a document. Wizard can be a sequence of property groups, keywords ( included thesausus ) and categories. By default wizard is disabled.

Can be configured a property groups as a list of property groups name separed by ","

wizard.property.groups=okg:consulting,okg:technology

To enable keyword wizard value must be "on". Default value is "off".

wizard.keywords=on

To enable categories wizard values must be "on". Default value is "off".

wizard.categories=on

Since: OpenKM 5.0

You can replace the default OpenKM logo in the login page and reports.

logo.login
logo.mobi
logo.report

Recommended image size:

  • logo.login: 316px × 74px
  • logo.mobi: 161px × 38px
  • logo.report: 150px × 35px

Also can set a message in the login page with:

logo.text

Since: OpenKM 5.1 (configuration stored into database)

Configuring WebDAV access

In recent OpenKM releases, WebDAV is disabled by default. If you want to enable it, set property system.webdav.server to on. The okm:root path may cause problems with some WebDAV clients. For this reason there is another configuration parameter system.webdav.fix which replace a path like okm:root with okm_root. See WebDAV access for more info.

Since: OpenKM 5.1

Disable document name mismatch check

By default OpenKM will check on checkin the document name to ensure you upload another version of the same document. You can disable this behavior with this configuration property:

system.document.name.mismatch.check=false

Since: OpenKM 5.0.1

Force keywords lowercase conversion

By default keywords are stored as is, but you can force a lowercase conversion using this configuration property:

system.keyword.lowercase

Since: OpenKM 5.1

Disable user assign on document creation

By default when an user creates a document or folder, he is added to the node with full permissions. You can disable this behavior this way:

user.assign.document.creation=off

Since: OpenKM 5.0.2

Improve OpenKM performance

If you experiment a slowndown of OpenKM when the number document grows, you can disable user quota or make use of the user items size cache.

To enable user items size cache:

user.item.cache=on

Starting from 5.1 user.item.cache is set to on by default.

To disable user quota, go to user profile and ser "Quota limit" to 0 (This field is in bytes). This feature of disabling quota is available from OpenKM 5.1.6.

Since: OpenKM 5.0.3

Change cache home

In case you have little space in your JBoss partition, you can configure to store the conversion cache folder in another one. For this, use the cache.home configuration property. By default is set to $JBOSS_HOME/cache.

Since: OpenKM 5.1.8